Buying Guide

Enjoy your patio, not the excess noise.
Featured banner image

Every unit that has a compressor is a bit different in size, where it is located and more. The main thing to consider is to have enough Quiet Fence™ so the sides and the front is covered. Most units sit close to a building. However, if your unit is portable like a generator, be sure to have enough Quiet Fence™ to go around all 4 sides.

Footprint: If you are standing in front of your unit, please do the following.  

  • A. Measure the width of the unit.
  • B. Measure the depth of the equipment from the front corner of the unit to the house
  • C. Measure from the ground to the top of the unit.

Surface: The type of surface your equipment is sitting on

  • A. Hard - Is your equipment on concrete/pavers and not on soil/dirt?
  • B. Soft- Is there soil/dirt around the pad the unit sits on?

The simple questions below address EACH of the conditions outlined above.

Dimensions of 1 or more Quiet Fences.

Dimensions:
1-Pack: 43" High x 48" Wide x 2¾" Deep (109cm H x 122cm W x 6.985cm D)

2-Pack: 43" High x 96" Wide x 2¾" Deep (109cm H x 244cm W x 6.985cm D)

3-Pack: 43" High x 144" Wide x 2¾" Deep (109cm H x 366cm W x 6.985cm D)

4-Pack: 43" High x 192" Wide x 2¾" Deep (109cm H x 488cm W x 6.985cm D)

5-Pack: 43" High x 240" Wide x 2¾" Deep (109cm H x 610cm W x 6.985cm D)

 

Each pack is hinged to allow for maximum flexible during installation. We recommend to keep the fences 8-12 inches away from the unit to allow for proper air flow.